Mitsubishi Electric MELSEC iQ-R Series - Writing Clock Data to the Programmable Controller on Another Station

17 CC-LINK IE CONTROLLER NETWORK INSTRUCTIONS
17.4 Writing Clock Data to the Programmable Controller on Another Station
1591
17
17.4 Writing Clock Data to the Programmable
Controller on Another Station
J(P).RTMWR, G(P).RTMWR, Z(P).RTMWR
These instruction write clock data to the programmable controller on another station.
■Execution condition
Ladder ST
ENO:=J_RTMWR(EN,J,s1,s2,s3,s4,d);
ENO:=JP_RTMWR(EN,J,s1,s2,s3,s4,d);
ENO:=G_RTMWR(EN,U,s1,s2,s3,s4,d);
ENO:=GP_RTMWR(EN,U,s1,s2,s3,s4,d);
ENO:=Z_RTMWR(EN,J/U,s1,s2,s3,s4,d);
ENO:=ZP_RTMWR(EN,J/U,s1,s2,s3,s4,d);
FBD/LD
Instruction Execution condition
J.RTMWR
G.RTMWR
Z.RTMWR
JP.RTMWR
GP.RTMWR
ZP.RTMWR
RnCPU
RnENCPU
RnSFCPU RnSFCPURnPCPURnPCPU
(Standard) (Safety)
(Redundant) (Process)
(J/U) (s1) (s2) (s3) (s4) (d)
EN ENO
J/U
s1
d
s2
s3
s4