Mitsubishi Electric MELSEC iQ-R Series - Outputting Pulses at Regular Intervals

896
7 APPLICATION INSTRUCTIONS
7.17 Pulse Related Instructions
Outputting pulses at regular intervals
PLSY
This instruction outputs the pulses of the specified frequency to the output module.
■Execution condition
Setting data
■Descriptions, ranges, and data types
*1 Only labels assigned to device (Y) can be used.
■Applicable devices
*1 Only Y can be used. Note, however, that it can be used only within the range of the number of I/O points (the number of points that can
access I/O modules).
Ladder ST
ENO:=PLSY(EN,s,n,d);
FBD/LD
Instruction Execution condition
PLSY
Operand Description Range Data type Data type (label)
(s) Frequency, or the start number of the device containing the
frequency
1 to 100 16-bit signed binary ANY16
*1
(n) Number of outputs, or the start number of the device
containing the number of outputs
0 to 65535 16-bit unsigned binary ANY16
(d) Device used for pulse output  Bit ANY_BOOL
EN Execution condition  Bit BOOL
ENO Execution result  Bit BOOL
Operand Bit Word Double word Indirect
specification
Constant Others
X, Y, M, L,
SM, F, B, SB,
FX, FY
J\ T, ST, C, D, W,
SD, SW, FD, R,
ZR, RD
U\G, J\,
U3E\(H)G
Z LT, LST,
LC
LZ K, H E $
(s)         
(n)         
(d) 
*1
       
RnCPU
RnENCPU
RnSFCPU RnSFCPURnPCPURnPCPU
(Standard) (Safety) (Redundant) (Process)
(s) (n) (d)
EN ENO
sd
n