Mitsubishi Electric MELSEC iQ-R Series - Page 1507

15 NETWORK COMMON INSTRUCTIONS
15.1 Link Dedicated Instructions
1505
15
Precautions
The J(P).ZNRD instruction cannot be executed when the CPU module on the target station is one of the following:
If executed, the dedicated instruction response timer causes a timeout in the instruction start source and the J(P).ZNRD
instruction is completed with an error. If the dedicated instruction response timer causes a timeout, use a CPU module
satisfying one of the following versions.
Operation error
*4 The completion status in which an error code is stored is as follows.
CC-Link IE Controller Network: SW003A
Ethernet: Buffer memory address 5323 (14CBH)
• AnUCPU with the version AX (manufactured in July 1995) or earlier
• A2USCPU(-S1) with the version CN (manufactured in July 1995) or earlier
• AnUCPU with the version AY (manufactured in July 1995) or later
• A2USCPU(-S1) with the version CP (manufactured in July 1995) or later
Error code
*4
Description
4000H to 4FFFH  MELSEC iQ-R CPU Module User's Manual (Application)
C000H to CFFFH  MELSEC iQ-R Ethernet User's Manual (Application)
E000H to EFFFH  MELSEC iQ-R CC-Link IE Controller Network User's Manual (Application)