1188
11 PROCESS CONTROL INSTRUCTIONS
11.1 Overview
Operation constant
The operation constant is an area in which the data used by only one process control instruction is stored.
The application of the operation constant varies depending on the instruction used. Refer to the descriptions of individual
instructions.
Local work memory
The local work memory is an area in which data is temporarily stored during operation of process control instructions.
The application and storage area of the local work memory vary depending on the instruction used. Refer to the descriptions
of individual instructions.
Setting input data Setting operation constant
Executing a process
control instruction
Operation result
Block memory
Data for operation
Data after operation
Local work memory
To Next Page
Loading...
