Mitsubishi Electric MELSEC iQ-R Series - Page 510

508
6 BASIC INSTRUCTIONS
6.7 Data Transfer Instructions
Processing details
• These instructions transfer the 16-bit binary data in the device specified by (s) to the (n) points of the device specified by
(d).
• When (s) is a word device and (d) is a bit device, the number of digit-specified bits in the word device is transferred.
Ex.
When K1Y30 is specified in (d), the lower 4 bits of the word device specified by (s) are transferred.
• When (s) is a digit-specified bit device and (d) is a word device, the number of digit-specified bits in the word device is
transferred.
Ex.
When K1X20 is specified in (s), the data is transferred to the lower 4 bits of the word device specified by (d).
• When both (s) and (d) are bit devices, set the same number of digits for both devices.
Operation error
There is no operation error.
(1) Ignored.
(2) Filled with 0s.

(n)
3456H
3456H
3456H
3456H
3456H
3456H
b15 b0
(s)
(d)
(d)+1
(d)+2
(d)+(n)-2
(d)+(n)-1

b15 b0
(s)
D100
b15  b2b3b4 b0b1
0111
(d)(d)+1(d)+2(d)+3
  Y37Y38Y3B Y3CY3F Y30Y33Y34
1011 10111 101 1011
(n)
X20X23
01111011 00101110
(s) (d)
X24X27X28X2BX2AX2F
b0b3
00000000 00001110
(d)+1
00000000 00001110
(d)+2
00000000 00001110
b4b15
·
(n)
     
(1)
(2)