Mitsubishi Electric MELSEC iQ-R Series - Page 594

592
7 APPLICATION INSTRUCTIONS
7.5 Data Table Operation Instructions
Processing details
• These instructions delete the (n)th data in the data table in the device specified by (d) and store it in the device specified by
(s). After execution of the FDEL(P) instruction, the data at the (n)+1th position and later in the data table is moved forward
one by one.
• A number from 0 to 65535 is stored in the number of data (d).
Operation error
N: Number of data
(1) When (n)=3, data in (d)+3 is deleted.
(2) Filled with 0.
Error code
(SD0)
Description
3405H The FDEL(P) instruction is executed when the value specified by (n) is 0.
The FDEL(P) instruction is executed when the value in the device specified by (d) is 0.
(d)+1
(d)+2
(d)+3
(d)+4
(d)+5
(d)
(s)
(d)+1
(d)+2
(d)+3
(d)+5
(d)+4
(d)
5432
3333
4
4444
1234
0
4444
0
5432
3333
3
1234
0
0
0
·
·
(2)
N
(1)