OSPF
118
Managed Switches
A screen similar to the following displays.
b. Under OSPF Configuration, in the Router ID field, enter 1.1.1.1.
c. Click Apply to save the settings.
5. Enable OSPF on the port 2/0/11.
a. Select Routing > OSPF > Advanced > Interface Configuration.
A screen similar to the following displays.
b. Under Interface Configuration, scroll down and select the interface 2/0/11 check box.
Now 2/0/11 appears in the Interface field at the top.
• In the OSPF Area ID field, enter 0.0.0.0.
• In the Admin Mode field, select Enable.
c. Click Apply to save the settings.
6. Enable OSPF on the port 2/0/19.
a. Select Routing > OSPF > Advanced > Interface Configuration.
To Next Page
Loading...
