NETGEAR M4200

OSPF
126
Managed Switches
d. Click Apply to save the settings.
3. Assign IP address 192.168.20.1 to port 2/0/19.
a. Select Routing > IP > Advanced > IP Interface Configuration.
A screen similar to the following displays.
b. Scroll down and select the interface 2/0/19 check box.
Now 2/0/19 appears in the Interface field at the top.
c. Enter the following information:
• In the IP Address field, enter 192.168.20.1.
• In the Subnet Mask field, enter 255.255.255.0.
• In the Admin Mode field, select Enable.
d. Click Apply to save the settings.
4. Specify the router ID, and enable OSPF for the switch.
a. Select Routing > OSPF > Basic > OSPF Configuration.
A screen similar to the following displays.
b. Under OSPF Configuration, in the Router ID field, enter 2.2.2.2.