Security Management
328
Managed Switches
5. Set the RADIUS server IP address.
6. Set the NAS-IP address for the RADIUS server.
7. Force 1/0/6 to be authorized for it to connect to the RADIUS server.
8. Show the dot1x detail for 1/0/5.
(Netgear Switch) (Config)#radius server host auth 192.168.0.1
(Netgear Switch) (Config)#radius server key auth 192.168.0.1
Enter secret (16 characters max):12345
Re-enter secret:12345
Set the radius server key.
(Netgear Switch) (Config)#radius server attribute 4 192.168.0.1
(Netgear Switch) (Config)#interface 1/0/6
(Netgear Switch) (Interface 1/0/6)#dot1x port-control force-authorized
(Netgear Switch) (Interface 1/0/6)#exit
(Netgear Switch) #show dot1x detail 1/0/5
Port........................................... 1/0/5
Protocol Version............................... 1
PAE Capabilities............................... Authenticator
Control Mode................................... auto
Authenticator PAE State........................ Authenticated
Backend Authentication State................... Idle
Quiet Period (secs)............................ 60
Transmit Period (secs)......................... 30
Guest VLAN ID.................................. 0
Guest VLAN Period (secs)....................... 90
Supplicant Timeout (secs)...................... 30
Server Timeout (secs).......................... 30
Maximum Requests............................... 2
VLAN Id........................................ 2000
VLAN Assigned Reason........................... RADIUS
Reauthentication Period (secs)................. 3600
Reauthentication Enabled....................... FALSE
Key Transmission Enabled....................... FALSE
Control Direction.............................. both
Maximum Users.................................. 16
Unauthenticated VLAN ID........................ 0
Session Timeout................................ 0
Session Termination Action..................... Default
To Next Page
Loading...
