NETGEAR M4200

DHCPv6 Server
477
Managed Switches
A screen similar to the following displays.
b. In the Interface list, select interface 1/0/9.
c. In the Ipv6 Prefix field, enter 2001:1::1.
d. In the Prefix Length field, select 64.
e. Click Add.
The IPv6 prefix for interface 1/0/9 is created.
5. Enable the DHCPv6 server configuration.
a. Select System > Services > DHCPv6 Server > DHCPv6 Server Configuration.
A screen similar to the following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply to save the settings.
6. Create a DHCPv6 pool named pool1.
a. Select System > Services > DHCP Server > DHCPv6 Pool Configuration.