DHCPv6 Server
481
Managed Switches
A screen similar to the following displays.
b. Scroll down and select the 2/0/21 check box to the left of the Interface column.
2/0/21 displays in the Interface field of the table heading.
c. In the IPv6 Mode field, select Enable.
d. In the Routing Mode field, select Enable.
e. Click Apply to save the settings.
3. Configure IPv6 address on interface 2/0/21.
a. Select Routing > IPv6 > Advanced > Prefix Configuration.
A screen similar to the following displays.
b. In the Interface list, select 1/0/21.
c. In the IPv6 Prefix field, enter 2003:1000::1.
d. In the Prefix Length field, enter 64.
e. In the EUI64 field, select Disable.
f. Click Add.
4. Enable DHCPv6 service.
a. Select System > Services > DHCPv6 Server > DHCPv6 Server Configuration.
To Next Page
Loading...
