NETGEAR M4200 User Manual

DHCPv6 Server
487
Managed Switches
A screen similar to the following displays.
b. In Pool Name list, select ipv6_server.
c. In the Prefix field, enter 2001:1:2::.
d. In the Prefix Length field, enter 64.
e. Click Add.
7. Enable the DHCPv6 pool on interface 1/0/1.
a. Select System > Services > DHCPv6 Server > DHCPv6 Interface Configuration.
A screen similar to the following displays.
b. Select the interface 1/0/1 check box to the left of the Interface column.
1/0/1 displays in the Interface field of the table heading.
c. In the Admin mode field, select Enable.
d. In the Pool Name field, enter ipv6_server.
e. Click Apply to save the settings.

NETGEAR M4200 Specifications

General

Brand	NETGEAR
Model	M4200
Category	Switch
Language	English