NETGEAR M4200

DHCPv6 Server
490
Managed Switches
3. On the DHCPv6 relay, configure the interface that is connected to the DHCPv6 client.
4. Enable DHCPv6.
5. Display the DHCPv6 binding information.
(Netgear Switch) #vlan data
(Netgear Switch) (Vlan)#vlan 2
(Netgear Switch) (Vlan)#vlan routing 2
(Netgear Switch) (Vlan)#exit
(Netgear Switch) (Config)#interface vlan 2
(Netgear Switch) (Interface vlan 2)#ipv6 address 2001:2::1/64
(Netgear Switch) (Interface vlan 2)#ipv6 dhcp relay destination 2001:1::2
(Netgear Switch) (Interface vlan 2)#ipv6 enable
(Netgear Switch) (Interface vlan 2)#exit
(Netgear Switch) (Config)#interface 1/0/19
(Netgear Switch) (Interface 1/0/19)#vlan pvid 2
(Netgear Switch) (Interface 1/0/19)#vlan participation include 2
(Netgear Switch) (Interface 1/0/19)#ipv6 enable
(Netgear Switch) (Interface 1/0/19)#exit
(Netgear Switch) (Config)#service dhcpv6
(Netgear Switch) #show ipv6 dhcp binding
Total number of bindings : 1
Client Address................................. fe80::6458:f6b:e2b:a0c3
Client Interface............................... vlan 2
Client DUID....................................
00:01:00:01:1d:c5:22:15:00:21:cc:70:0b:bf
Identity Association ID........................ 83894732
Binding Prefix Address......................... 2001:2::1
Binding Prefix Type ........................... IA_NA
Binding Expiration (secs)...................... 4294967255
Binding Prefix Valid Lifetime (secs)........... infinite
Binding Prefix Preferred Lifetime (secs)....... infinite