Tunnels for IPv6
533
Managed Switches
b. Configure the following tunnel settings:
• In the Tunnel ID field, select 0.
• In the Mode field, select 6-to-4.
• In the IPv6 Mode field, select Enable.
• In the IPv6 Address/Prefix Length field, enter 2002:c301:302::1/16.
• In the EUI64 field, select Disable.
• In the Source Address field, enter 195.1.3.2.
c. Click Add.
7. Create a default route for nonnative IPv6 addresses.
a. Select Routing > IPv6 > Advanced > Static Route Configuration.
A screen similar to the following displays.
b. Configure the following route settings:
• In the IPv6 Prefix field, enter 8888::.
• In the Prefix Length field, enter 16.
To Next Page
Loading...
