Tunnels for IPv6
537
Managed Switches
d. Configure the following settings:
• In the IPv6 Mode field, select Enable.
• In the Routing Mode field, select Enable.
e. Click Apply.
5. Configure an IPv6 address for routing interface 2/0/3.
a. Select Routing > IPv6 > Advanced > Prefix Configuration.
A screen similar to the following displays.
b. From the Interface menu, select 2/0/3.
The settings for port 2/0/3 display in the fields in the table heading.
c. Configure the following settings:
• In the Ipv6 Prefix field, enter 2002:c301:402:1::1.
• In the Prefix Length field, enter 64.
• In the EUI64 field, select Disable.
d. Click Add.
6. Create a 6to4 tunnel interface.
a. Select Routing > IPv6 > Advanced > Tunnel Configuration.
A screen similar to the following displays.
To Next Page
Loading...
