NETGEAR M4200

IPv6 Interface Configuration
553
Managed Switches
A screen similar to the following displays.
b. For IPv6 Unicast Routing, select the Enable radio button.
c. Click Apply to apply the setting.
2. Enable DHCPv6 on the interface 1/0/23.
a. Select Routing > IPv6 > Advanced > Interface Configuration.
A screen similar to the following displays.
b. Scroll down and select the interface 1/0/23 check box.
Now 1/0/23 appears in the Interface field at the top.
c. Enter the following information:
• In the IPv6 Mode field, select Enable.
• In the Routing Mode field, select Enable.
• In the DHCPv6 Client Mode field, select Enable.
d. Click Apply to apply the settings.
3. Show the ipv6 address assigned from 1/0/23.
a. Select Routing > IPv6 > Advanced > Prefix Configuration.