PIM
595
Managed Switches
7. Enable PIM-SM globally.
a. Select Routing > Multicast > PIM > Global Configuration.
A screen similar to the following displays.
b. For PIM Protocol Type, select the PIM-SM radio button.
c. For Admin Mode, select the Enable radio button.
d. Click Apply.
8. Enable PIM-SM on interfaces 1/0/21 and 1/0/22.
a. Select Routing > Multicast > PIM > Interface Configuration.
A screen similar to the following displays.
b. Scroll down and select the Interface 1/0/21 and 1/0/22 check boxes.
c. In the Admin Mode field, select Enable.
d. Click Apply to save the settings.
9. Candidate RP Configuration.
a. Select Routing > Multicast > PIM > Candidate RP Configuration.
To Next Page
Loading...
