PIM
599
Managed Switches
A screen similar to the following displays.
b. In the Interface list, select 1/0/21.
c. For RIP Admin Mode, select the Enable radio button.
d. Click Apply.
6. Enable RIP on interface 1/0/22.
a. Select Routing > RIP > Advanced > Interface Configuration.
A screen similar to the following displays.
b. In the Interface list, select 1/0/22.
c. For RIP Admin Mode, select the Enable radio button.
d. Click Apply.
7. Enable RIP on interface 1/0/24.
a. Select Routing > RIP > Advanced > Interface Configuration.
A screen similar to the following displays.
b. In the Interface list, select 1/0/24.
c. For RIP Admin Mode, select the Enable radio button.
d. Click Apply.
8. Enable multicast globally.
a. Select Routing > Multicast > Global Configuration.
To Next Page
Loading...
