NETGEAR M4200 - Page 606

DHCP L2 Relay and L3 Relay
606
Managed Switches
2. Enable the DHCP L2 relay on the switch.
3. Enable the Option 82 Circuit ID field.
4. Enable the Option 82 Remote ID field.
5. Enable DHCP L2 relay on port 1/0/4.
6. Enable DHCP L2 relay on port 1/0/5.
7. Enable DHCP L2 relay on port 1/0/6.
8. Trust packets with option 82 received on port 1/0/6.
(Netgear Switch) (Config)#dhcp l2relay
(Netgear Switch) (Config)#dhcp l2relay vlan 200
(Netgear Switch) (Config)#dhcp l2relay circuit-id vlan 200
(Netgear Switch) (Config)#dhcp l2relay remote-id rem_id vlan 200
(Netgear Switch) (Config)#interface 1/0/4
(Netgear Switch) (Interface 1/0/4)# dhcp l2relay
(Netgear Switch) (Interface 1/0/4)# vlan pvid 200
(Netgear Switch) (Interface 1/0/4)# vlan participation include 200
(Netgear Switch) (Interface 1/0/4)# exit
(Netgear Switch) (Config)#interface 1/0/5
(Netgear Switch) (Interface 1/0/5)# dhcp l2relay
(Netgear Switch) (Interface 1/0/5)# vlan pvid 200
(Netgear Switch) (Interface 1/0/5)# vlan participation include 200
(Netgear Switch) (Interface 1/0/5)# exit
(Netgear Switch) (Config)#interface 1/0/6
(Netgear Switch) (Interface 1/0/6)# dhcp l2relay
(Netgear Switch) (Interface 1/0/6)# dhcp l2relay trust
(Netgear Switch) (Interface 1/0/6)# vlan pvid 200
(Netgear Switch) (Interface 1/0/6)# vlan participation include 200
(Netgear Switch) (Interface 1/0/6)# exit