NETGEAR M4200 - Page 620

DHCP L2 Relay and L3 Relay
620
Managed Switches
A screen similar to the following displays.
b. Scroll down and select the Port 1/0/4 check box.
c. In the IP Address field, enter 10.100.1.2.
d. In the Subnet Mask field, enter 255.255.255.0.
e. In the Routing Mode field, select Enable.
f. Click Apply to save the settings.
3. Create a routing interface and assign 10.200.1.1/24 to it.
a. Select Routing > IP > Advanced > IP Interface Configuration.
A screen similar to the following displays.
b. Under IP Interface Configuration, scroll down and select the Port 1/0/15 check box.
c. In the IP Address Configuration Method field, enter Manual.
d. In the IP Address field, enter 10.200.1.1.
e. In the Subnet Mask field, enter 255.255.255.0.
f. In the Routing Mode field, select Enable.
g. Click Apply to save the settings.
4. Create a routing interface and assign 10.200.2.1/24 to it.
a. Select Routing > IP > Advanced > IP Interface Configuration.