NETGEAR M4200

MLD
629
Managed Switches
c. Enter the following information:
• In the IPv6 Prefix field, enter 2001:2::1.
• In the Prefix Length field, enter 64.
• In the EUI64 field, select Disable.
d. Click Add to save the settings.
6. Configure the router ID of OSPFv3.
a. Select Routing > OSPFv3 > Basic > OSPFv3 Configuration.
A screen similar to the following displays.
b. In the Router ID field, enter 1.1.1.1.
c. For Admin Mode, select the Enable radio button.
d. Click Apply.
7. Enable OSPFv3 on interfaces 1/0/1 and 1/0/13.
a. Select Routing > OSPFv3 > Advanced > Interface Configuration.
A screen similar to the following displays.
b. Scroll down and select the Interface 1/0/1 and 1/0/13 check boxes.
c. In the Admin Mode field, select Enable.
d. Click Apply to save the settings.
8. Enable multicast globally.
a. Select Routing > Multicast > Global Configuration.