NETGEAR M4200

DVMRP
644
Managed Switches
DVRMP on Switch B
1. Create routing ports 1/0/13 and 1/0/20.
2. Enable IP multicast forwarding on the switch.
3. Enable DVMRP protocol on the switch.
4. Enable DVMRP mode on interfaceS 1/0/13 and 1/0/20.
(Netgear Switch) #show ip mcast mroute summary
Multicast Route Table Summary
Incoming Outgoing
Source IP Group IP Protocol Interface Interface List
------------- ------------ ---------- --------- ---------------
192.168.1.2 225.0.0.1 DVMRP 1/0/1 1/0/21
(Netgear Switch) #config
(Netgear Switch) (Config)#ip routing
(Netgear Switch) (Config)#interface 1/0/13
(Netgear Switch) (Interface 1/0/13)#routing
(Netgear Switch) (Interface 1/0/13)#ip address 192.168.2.2 255.255.255.0
(Netgear Switch) (Interface 1/0/13)#exit
(Netgear Switch) (Config)#interface 1/0/20
(Netgear Switch) (Interface 1/0/20)#routing
(Netgear Switch) (Interface 1/0/20)#ip address 192.l.168.4.1 255.255.255.0
(Netgear Switch) (Interface 1/0/20)#exit
(Netgear Switch) (Config)#exit
(Netgear Switch) (Config)#ip multicast
(Netgear Switch) (Config)#ip dvmrp
(Netgear Switch) (Config)#interface 1/0/13
(Netgear Switch) (Interface 1/0/13)#ip dvmrp
(Netgear Switch) (Interface 1/0/13)#ex
(Netgear Switch) (Config)#interface 1/0/20
(Netgear Switch) (Interface 1/0/20)#ip dvmrp
(Netgear Switch) (Interface 1/0/20)#exit
(Netgear Switch) (Config)#exit