VLAN Routing
84
Managed Switches
2. Add ports to the VLAN10 and VLAN20.
a. Select Switching > VLAN > Advanced > VLAN Membership.
A screen similar to the following displays.
b. In the VLAN ID field, select 10.
c. Click the Unit 1. The ports display.
d. Click the gray boxes under ports 1 and 2 until T displays.
The T specifies that the egress packet is tagged for the port.
e. Click Apply.
f. Select Switching > VLAN > Advanced > VLAN Membership.
A screen similar to the following displays.
g. In the VLAN ID list, select 20.
h. Click Unit 1. The ports display.
i. Click the gray box under port 3 until T displays.
The T specifies that the egress packet is tagged for the port.
To Next Page
Loading...
