4. In the AMedia Type list, select the type of paper that is loaded. In this case, click Plain Paper.
5. Select the printing application in the EPrint Target list.
6. Click the Page Setup tab to display the Page Setup sheet.
7. Click Roll Paper in the LPaper Source list.
8. Select the width of the loaded roll in the MRoll Paper Width list-in this case, ISO A2/A3 Roll
(420.0mm).
9. In the APage Size list, click the size of the original as specified in the application. In this case,
click ISO A4.
10. Select the CEnlarged/Reduced Printing check box.
11. Click ISO A4 in the GPaper Size list.
12. Click FScaling and enter 120.
Note
To Next Page
Loading...
