ï½¥ You can specify enlargement that exceeds the paper size, but in this case,
the portions off the bottom and right edges of the paper will not be printed.
ï½¥ If the original size after enlargement or reduction is smaller than the paper
size, the original is printed in the upper-left corner. In this case, you can
center originals by selecting
EPrint Centered on the Layout sheet.
13. Confirm the print settings and print as desired.
Note
ï½¥ For tips on confirming print settings, see "Confirming Print Settings (
4.1.3)"
To Next Page
Loading...
Need help?
General