Choose from the following options when this setting is activated.
● Resizing Originals to Match the Paper Size (3.3.1)
● Resizing Originals to Fit the Roll Width (3.3.4)
● Resizing Originals by Entering a Scaling Value (3.3.7)
DFit Paper Size
Scales the document image to match the paper size.
EFit Roll Paper Width
Scales the document image to match the roll width.
FScaling
Resizes the document image based on a specified scaling value. Enter a value in a range of 5-600.
GPaper Size
Choose the size of the paper you will print on.
For details on available paper sizes, see "Paper Sizes (6.1.2)"
HOrientation
Choose the printing orientation.
● Making the Original Orientation Match the Paper Orientation (3.12.3)
KRotate Page 90 degrees (Conserve Paper)
Activate this setting to rotate the document image by 90 degrees before printing.
● Conserving Roll Paper by Rotating Originals 90 Degrees (3.9.1)
LPaper Source
Choose the feed source, as desired.
Options displayed in the list vary depending on the selection in Media Type on the Main sheet.
MRoll Paper Width
Choose the roll width.
To Next Page
Loading...
Need help?
General