9. Press or to select the pattern number you have decided, and then press the OK
button.
Test pattern B is printed for adjustment.
Note
ï½¥ If you printed test pattern A on a sheet, follow the instructions on the
Display Screen and use another sheet of the same type of paper.
Additionally, after test pattern B is printed, follow the instructions on
the Display Screen and remove the sheet.
10. Examine test pattern B for adjustment. Determine the pattern in which banding is least
noticeable.
11. Press or to select the pattern number you have decided, and then press the OK
button.
The adjustment value is now registered, and adjustment is complete.
To Next Page
Loading...
Need help?
General