Static Link Aggregation Specifications Configuring Static Link Aggregation
page 7-2 OmniSwitch AOS Release 7 Network Configuration Guide June 2013
Static Link Aggregation Specifications
The table below lists specifications for static groups.
Static Link Aggregation Default Values
The table below lists default values and the commands to modify them for static aggregate groups.
Platforms Supported OmniSwitch 10K, 6900
Maximum number of link aggregation groups 128
Maximum number of links per group supported 8
Maximum number of linkagg ports per system 256
Parameter Description Command Default Value/Comments
Administrative State linkagg static agg admin-state enabled
Group Name linkagg static agg name No name configured