Configuring MVRP Verifying the MVRP Configuration
OmniSwitch AOS Release 7 Network Configuration Guide June 2013 page 12-15
Verifying the MVRP Configuration
A summary of the commands used for verifying the MVRP configuration is given here:
For more information about the output details that result from these commands, see the OmniSwitch CLI
Reference Guide.
show mvrp last-pdu-origin Displays the source MAC address of the last MVRP message
received on specific ports or aggregates.
show mvrp configuration Displays the global configuration for MVRP.
show mvrp linkagg Displays the MVRP configuration for a specific port or an aggregate
of ports.
show mvrp port Displays the MVRP configurations for all the ports, including timer
values, registration and applicant modes.
show mvrp vlan-restrictions Displays the list of VLANS learned through MVRP and their details.
show mvrp timer Displays the timer values configured for all the ports or a specific
port.
show mvrp statistics Displays the MVRP statistics for all the ports, aggregates, or specific
ports.
clear mvrp statistics Clears MVRP statistics for all the ports, an aggregate of ports, or a
specific port.
To Next Page
Loading...
Need help?
General