In This Chapter Configuring Dynamic Automatic Fabric
page 14-2 OmniSwitch AOS Release 7 Network Configuration Guide June 2013
In This Chapter
This chapter describes the basic components of Auto-Fabric and its operation and configuration through
the Command Line Interface (CLI). CLI commands are used in the configuration examples; for more
details about the syntax of the commands, see the OmniSwitch CLI Reference Guide.
The following information and configuration procedures are included in this chapter:
• “Auto-Fabric Specifications” on page 14-3
• “Auto-Fabric Default Values” on page 14-4
• “Quick Steps for Configuring Auto-Fabric” on page 14-5
• “Auto-Fabric Overview” on page 14-7
• “Auto-Fabric Discovery Examples” on page 14-9
• “Interaction with Other Features” on page 14-11
• “Configuring Auto-Fabric” on page 14-14
• “Displaying Auto-Fabric Configuration and Status” on page 14-16
To Next Page
Loading...
Need help?
General