Configuring Virtual Chassis Displaying Virtual Chassis Configuration and Status
OmniSwitch AOS Release 7 Network Configuration Guide June 2013 page 9-25
Displaying Virtual Chassis Configuration and
Status
You can use Command Line Interface (CLI) show commands to display the current configuration and
status of a virtual chassis group. These commands include the following:
For more information about the output details that result from these commands, see the OmniSwitch CLI
Reference Guide.
show virtual-chassis topology Displays details about the configured and operational parameters
related to all switches participating in the virtual chassis topology
show virtual-chassis vf-link Displays the configured and operational parameters related to the
virtual-fabric link and member ports.
show virtual-chassis consistency Displays detailed status of the parameters that are taken into account
to determine the consistency of a group of switches participating in
the virtual chassis topology.
To Next Page
Loading...
Need help?
General