Configuring Service Assurance Agent Verifying the SAA Configuration
OmniSwitch AOS Release 7 Network Configuration Guide June 2013 page 36-9
<index id="3">
…
</index>
</saaId>
</root>
Verifying the SAA Configuration
To display information about SAA on the switch, use the show commands listed below:
show saa Displays generic configuration parameters for all the configured SAAs.
show saa type config Displays configured SAAs for the given type.
show saa spb Displays session parameters applies to SPB SAAs.
show saa xml Displays configuration information for the SAA XML history file.
show saa statistics Displays latest record, aggregated record or history.
To Next Page
Loading...
Need help?
General