OmniSwitch AOS Release 7 Network Configuration Guide June 2013 page 26-1
26 Managing Policy
Servers
Quality of Service (QoS) policies that are configured through Alcatel-Lucent’s PolicyView network
management application are stored on a Lightweight Directory Access Protocol (LDAP) server. Policy-
View is an OmniVista application that runs on an attached workstation.
In This Chapter
This chapter describes how LDAP directory servers are used with the switch for policy management.
There is no required configuration on the switch. When policies are created on the directory server through
PolicyView, the PolicyView application automatically configures the switch to communicate with the
server. This chapter includes information about modifying configuration parameters through the
Command Line Interface (CLI) if manual reconfiguration is necessary. For more details about the syntax
of commands, see the OmniSwitch CLI Reference Guide.
Throughout this chapter the term policy server is used to refer to LDAP directory servers used to store
policies. Procedures described in this chapter include:
• “Installing the LDAP Policy Server” on page 26-3
• “Modifying Policy Servers” on page 26-4
• “Verifying the Policy Server Configuration” on page 26-7
To Next Page
Loading...
Need help?
General