Server Load Balancing Specifications Configuring Server Load Balancing
page 23-2 OmniSwitch AOS Release 7 Network Configuration Guide June 2013
Server Load Balancing Specifications
The table below lists specifications for Alcatel-Lucent’s SLB software.
Platforms Supported OmniSwitch 10K, 6900
Maximum number of clusters 16
Maximum number of physical servers per cluster 16
Layer-3 classification Destination IP address
QoS policy condition
Layer-2 classification QoS policy condition
Server health checking Ping, link checks
High availability support Hardware-based failover, VRRP, Chassis
Management Module (CMM) redundancy
Networking protocols supported Virtual IP (VIP) addresses
Maximum number of probes on a switch 40
To Next Page
Loading...
Need help?
General