Configuring Virtual Chassis Virtual Chassis Specifications
OmniSwitch AOS Release 7 Network Configuration Guide June 2013 page 9-3
Virtual Chassis Specifications
The table below lists specifications for dynamic aggregation groups and ports:
Platforms Supported OmniSwitch 10K, 6900
Maximum number of physical switches in a Virtual Chassis
Note: Must be the same platform type.
2
Valid chassis identifier 1 or 2
Valid chassis group identifier 0–255
Valid chassis priority 0-255
Maximum number of Virtual Fabric Links 1
Valid Virtual Fabric Link identifier 0
Valid control VLAN 2-4094
Valid Virtual Chassis protocol hello interval 1-10
Maximum number of member ports per Virtual Fabric Link 16
Licenses Required Advanced
Notes:
Distributed MAC Learning Mode is not supported on a Virtual Chassis
To Next Page
Loading...
Need help?
General