Managing Authentication Servers Verifying the Authentication Server Configuration
OmniSwitch AOS Release 7 Network Configuration Guide June 2013 page 29-27
Removing an LDAP Authentication Server
To delete an LDAP server from the switch configuration, use the no form of the command with the rele-
vant server name.
-> no aaa ldap-server topanga5
The topanga5 server is removed from the configuration.
Verifying the Authentication Server Configuration
To display information about authentication servers, use the following command:
An example of the output for this command is given in “Quick Steps For Configuring Authentication
Servers” on page 29-4. For more information about the output of this command, see the OmniSwitch CLI
Reference Guide.
show aaa server Displays information about a particular AAA server or AAA servers.
To Next Page
Loading...