Configuring Universal Network Profiles UNP Defaults
OmniSwitch AOS Release 7 Network Configuration Guide June 2013 page 27-3
UNP Defaults
The following default settings are applied when the Universal Network Profile (UNP) feature is enabled
on a switch port.
UNP Port Configuration Defaults
By default, UNP functionality is disabled on all switch ports and link aggregates. When UNP is enabled
on a port or link aggregate, the following default attribute values are applied to the UNP port:
UNP Global Configuration Defaults
The following global default values are applied to traffic ingressing on all UNP ports or link aggregates.
UNP Profile Configuration Defaults
Description Keyword Default
The UNP status for the port unp port Disabled
The UNP port type unp port-type Bridge
Customer Domain ID assignment unp unp-customer-domain 0
The MAC authentication status for
the UNP port.
unp mac-authentication Disabled
Alternate pass UNP for MAC
authentication
unp mac-authentication pass-alternate None
The classification status for the
UNP port.
unp classification Disabled
Default profile for the UNP port. unp default-vlan-profile
unp default-spb-profile
None
Trust VLAN tag status unp port trust-tag Disabled
Description Keyword Default
Dynamic UNP VLAN configuration unp dynamic-vlan-configuration Disabled
Dynamic profile configuration. unp dynamic-profile-configuration Disabled
UNP Customer Domains unp customer-domain 0
Authentication server down UNP unp auth-server-down-unp None
Authentication server down timer unp auth-server-down-timeout 60 seconds
Description Keyword Default
VLAN classification profiles unp vlan-profile None
Service classification profiles unp spb-profile None
QoS Policy Lists unp vlan-profileunp spb-profile No list is assigned.
To Next Page
Loading...
Need help?
General