Configuring IPv6 Assigning IPv6 Addresses
OmniSwitch AOS Release 7 Network Configuration Guide June 2013 page 17-17
See “IPv6 Addressing” on page 17-7 for an overview of IPv6 address notation. Refer to RFC 4291 for
more technical address information.
Removing an IPv6 Address
To remove an IPv6 address from an interface, use the no form of the ipv6 address command as shown:
-> no ipv6 address 2001:db8:4100:1000::20 v6if-v200
Note that the subnet router anycast address is automatically deleted when the last unicast address of the
same subnet is removed from the interface.
To Next Page
Loading...
Need help?
General