OmniSwitch os6900 User Manual

Configuring Multi-chassis Link Aggregation Multi-chassis Link Aggregation Specifications
OmniSwitch AOS Release 7 Network Configuration Guide June 2013 page 10-3
Multi-chassis Link Aggregation Specifications
The table below lists specifications for dynamic aggregation groups and ports:
Note. MCLAG between an OS6900 and OS10K is not supported. In addition, each multi-chassis peer
switch must run the same version of the OmniSwitch AOS Release 7 software for MCLAG support.
Platforms Supported OmniSwitch 10K, 6900
Maximum number of MCLAG aggregates on multi-chassis domain 128
Maximum number of LAG aggregates on multi-chassis domain 128
Combined maximum number of MCLAG and LAG aggregates on
multi-chassis domain
128
Maximum number of ports per MCLAG aggregate 8
Maximum number of peer switches per multi-chassis domain 2
Valid chassis identifier 1 or 2
Valid chassis group identifier 0–255
Maximum number of Virtual Fabric Links 1
Maximum number of ports per Virtual Fabric Link 8

OmniSwitch os6900 Specifications

General

Brand	OmniSwitch
Model	os6900
Category	Switch
Language	English