OmniSwitch os6900 User Manual

Learned Port Security Specifications Configuring Learned Port Security
page 31-2 OmniSwitch AOS Release 7 Network Configuration Guide June 2013
Learned Port Security Specifications
Learned Port Security Defaults
Platforms Supported OmniSwitch 10K, 6900
Ports eligible for Learned Port Security Fixed and 802.1Q tagged
Ports not eligible for Learned Port Security Link aggregate ports.
802.1Q (trunked) link aggregate ports.
Minimum number of learned MAC addresses
allowed per LPS port
1
Maximum number of learned MAC addresses
allowed per LPS port
1000
Maximum number of filtered MAC addresses
allowed per LPS port
100
Maximum number of configurable MAC address
ranges per LPS port
1
Parameter Description Command Default
LPS status for a port. port-security disabled
Number of learned MAC addresses
allowed on an LPS port.
port-security maximum 1
Maximum number of filtered MAC
addresses that the LPS port can
learn.
port-security port max-filter-
ing
5
Source learning time limit. port-security learning-window disabled
MAC address range per LPS port. port-security mac-range 00:00:00:00:00:00–
ff:ff:ff:ff:ff:ff
LPS port violation mode. port-security port violation restrict
Number of bridged MAC addresses
learned before a trap is sent.
port-security learn-trap-
threshold
5

OmniSwitch os6900 Specifications

General

Brand	OmniSwitch
Model	os6900
Category	Switch
Language	English