Displaying MCLAG Configuration and Statistics Configuring Multi-chassis Link Aggregation
page 10-38 OmniSwitch AOS Release 7 Network Configuration Guide June 2013
Displaying MCLAG Configuration and Statistics
You can use Command Line Interface (CLI) show commands to display the current configuration and
statistics of Multi-chassis link aggregation. These commands include the following:
For more information about the output details that result from these commands, see the OmniSwitch CLI
Reference Guide.
show multi-chassis status Displays the configured and operational parameters related to the
multi-chassis feature on the local chassis.
show multi-chassis vf-link Displays the configured and operational parameters related to the
virtual fabric link on the local chassis.
show multi-chassis vf-link
member-port
Displays the configured and operational parameters related to the
virtual fabric link member ports on the local chassis
show multi-chassis consistency Displays the system level mandatory consistency parameters of both
the local and peer chassis
show multi-chassis consistency
linkagg
Displays the per-multi-chassis aggregate consistency parameters of
both the local and peer chassis given the aggregate identifier.
To Next Page
Loading...
Need help?
General