OmniSwitch os6900 User Manual

802.1AB Specifications Configuring 802.1AB
page 13-2 OmniSwitch AOS Release 7 Network Configuration Guide June 2013
802.1AB Specifications
802.1AB Defaults Table
The following table shows the default settings of the configurable 802.1AB parameters.
Platforms Supported OmniSwitch 10K, 6900
IEEE Specification IEEE 802.1AB-2005 Station and Media Access
Control Connectivity Discovery
Maximum number of network policies that
can be associated with a port
8
Maximum number of network policies
that can be configured on the switch
32
Parameter Description Command Default Value/Comments
Transmit time interval for LLDPDUs lldp transmit interval 30 seconds
Transmit hold multiplier value lldp transmit hold-multiplier 4
Transmit delay lldp transmit delay 2 seconds
Reinit delay lldp reinit delay 2 seconds
Notification interval lldp notification interval 5 seconds
LLDPDUs transmission lldp lldpdu Transmission and Reception
Per port notification lldp notification Disable
Management TLV lldp tlv management Disable
802.1 TLV lldp tlv dot1 Disable
802.3 TLV lldp tlv dot3 Disable
LLDP Media Endpoint Device lldp tlv med Disable

OmniSwitch os6900 Specifications

General

Brand	OmniSwitch
Model	os6900
Category	Switch
Language	English