Displaying Auto-Fabric Configuration and Status Configuring Dynamic Automatic Fabric
page 14-16 OmniSwitch AOS Release 7 Network Configuration Guide June 2013
Displaying Auto-Fabric Configuration and Status
You can use Command Line Interface (CLI) show commands to display the current configuration and
status of auto-fabric. These commands include the following:
For more information about the output details that result from these commands, see the OmniSwitch CLI
Reference Guide.
show auto-fabric config Displays details about the globally configured and operational
parameters.
show auto-fabric config interface Displays details about the interface configured and operational
parameters.
To Next Page
Loading...
Need help?
General