OmniSwitch os6900 User Manual

Configuring Learned Port Security Displaying Learned Port Security Information
OmniSwitch AOS Release 7 Network Configuration Guide June 2013 page 31-17
Displaying Learned Port Security Information
To display LPS port and table information, use the show commands listed below:
For more information about the resulting display from these commands, see the OmniSwitch CLI Refer-
ence Guide. An example of the output for the show port-security, show port-security
learning-window and show violation commands is also given in “Sample Learned Port Security Configu-
ration” on page 31-3.
show port-security Displays Learned Port Security (LPS) configuration and table
entries.
show port-security learning-window Displays the amount of time during which source learning can
occur on all LPS ports.
show violation Displays the address violations that occur on ports with LPS
restrictions.

OmniSwitch os6900 Specifications

General

Brand	OmniSwitch
Model	os6900
Category	Switch
Language	English