OmniSwitch AOS Release 7 Network Configuration Guide June 2013 page 16-1
16 Configuring Multiple VRF
Multiple Virtual Routing and Forwarding (VRF) provides a mechanism for segmenting Layer 3 traffic into
virtual routing domains (instances) on the same switch. Each routing instance independently maintains its
own routing and forwarding table, peer, and interface information.
In This Chapter
This chapter describes the Multiple VRF feature and how to configure it through the Command Line
Interface (CLI). CLI commands are used in the configuration examples; for more details about the syntax
of commands, see the OmniSwitch CLI Reference Guide. This chapter provides an overview of Multiple
VRF and includes the following information:
• “VRF Specifications” on page 16-2.
• “VRF Defaults” on page 16-2.
• “Quick Steps for Configuring Multiple VRF” on page 16-3.
• “Multiple VRF Overview” on page 16-6.
• “VRF Interaction With Other Features” on page 16-11.
• “Configuring VRF Instances” on page 16-14.
• “Verifying the VRF Configuration” on page 16-19.
To Next Page
Loading...
Need help?
General