Verifying the VRRP Configuration Configuring VRRP
page 22-18 OmniSwitch AOS Release 7 Network Configuration Guide June 2013
Verifying the VRRP Configuration
A summary of the show commands used for verifying the VRRP configuration is given here:
For more information about the displays that result from these commands, see the OmniSwitch CLI Refer-
ence Guide.
show vrrp Displays the virtual router configuration for all virtual routers or for a
particular virtual router.
show vrrp statistics Displays statistics about VRRP packets for all virtual routers configured
on the switch or for a particular virtual router.
show vrrp track Displays information about tracking policies on the switch.
show vrrp track-association Displays the tracking policies associated with virtual routers.
show vrrp group Displays the default parameter values for all the virtual router groups or
for a specific virtual router group.
show vrrp group-association Displays the virtual routers that are associated with a group.
To Next Page
Loading...
Need help?
General