Configuring VRRP VRRP Configuration Overview
OmniSwitch AOS Release 7 Network Configuration Guide June 2013 page 22-17
overrides the existing advertising interval value, priority value and preempt mode with the modified
default values.
The next command enables all the virtual routers in the group except the virtual routers that are disabled
individually. To enable all the virtual routers in the group including those which are disabled individually,
you can use the vrrp group command with the enable-all option as follows:
-> vrrp group 25 admin-state enable-all
Note. Even though a virtual router may be assigned to a group, its parameter values and administrative
status can still be modified individually.