Modifying Dynamic Link Aggregate Group Parameters Configuring Dynamic Link Aggregation
page 8-18 OmniSwitch AOS Release 7 Network Configuration Guide June 2013
Note. Specifying none removes all administrative states from the LACPDU configuration. For example:
-> linkagg lacp port 5/49 actor admin-state none
For example, to set bits 0 (active) and 2 (aggregate) on dynamic aggregate actor port 49 in slot 5 you
would enter:
-> linkagg lacp port 5/49 actor admin-state active aggregate
For example, to set bits 0 (active) and 2 (aggregate) on dynamic aggregate actor port 49 in slot 5, enter:
-> linkagg lacp port 5/49 actor admin-state active aggregate
Restoring Actor Port Administrative State Values
To restore LACPDU bit settings to their default values, use the no form of the linkagg lacp port actor
admin-state command by entering the active, timeout, and aggregate keywords.
For example, to restore bits 0 (active) and 2 (aggregate) to their default settings on dynamic aggregate
actor port 2 in slot 5, enter:
-> no linkagg lacp port 5/2 actor admin-state active aggregate
collect Specifying this keyword has no effect because the system always deter-
mines its value. When this bit (bit 4) is set by the system, incoming
LACPDU frames are collected from the individual ports that make up
the dynamic aggregate group.
distribute Specifying this keyword has no effect because the system always deter-
mines its value. When this bit (bit 5) is set by the system, distributing
outgoing frames on the port is disabled.
default Specifying this keyword has no effect because the system always deter-
mines its value. When this bit (bit 6) is set by the system, it indicates
that the actor is using defaulted partner information administratively
configured for the partner.
expire Specifying this keyword has no effect because the system always
determines its value. When this bit (bit 7) is set by the system, the actor
cannot receive LACPDU frames.
linkagg lacp agg actor
admin-state Keyword
Definition
To Next Page
Loading...
Need help?
General