OmniSwitch os6900 User Manual

Configuring Universal Network Profiles Verifying the UNP Configuration
OmniSwitch AOS Release 7 Network Configuration Guide June 2013 page 27-45
As shown in the following show unp user command example, the “Learning Source” field displays
“Local” or “Remote” to indicate on which multi-chassis peer switch the device MAC address was learned:
-> show unp user
Total users: 3
User Learning
Port Username Mac address IP Vlan UNP Status Source
----+-----------------+-----------------+---------+-----+-------+-------+----------
1/1 00:00:00:00:00:01 00:00:00:00:00:01 10.0.0.1 10 Sales Active Local
0/10 00:80:df:00:00:04 00:80:df:00:00:04 30.0.0.5 30 - Block Remote
0/11 00:80:df:00:00:05 00:80:df:00:00:05 40.0.0.5 30 - Active Local
For more information about the displays that result from these commands, see the OmniSwitch CLI Refer-
ence Guide.

OmniSwitch os6900 Specifications

General

Brand	OmniSwitch
Model	os6900
Category	Switch
Language	English