Verifying the VLAN Configuration Configuring VLANs
page 4-14 OmniSwitch AOS Release 7 Network Configuration Guide June 2013
The above example output provides the following information:
• VLAN 200 is the configured default VLAN for port 3/24, which is currently not active.
• VLAN 200 is an 802.1Q-tagged VLAN for port 5/12, which is an active port but currently blocked
from forwarding traffic.
For more information about the resulting displays from these commands, see the OmniSwitch CLI Refer-
ence Guide.
To Next Page
Loading...
Need help?
General